Sequential recording from several discs:
1Perform steps 1 - 5 in "Recording from a CD or MP3 disc" on page 28.
2Within 5 seconds, press the 
/ 
button.
To perform programmed recording:
1Programme discs and tracks (see pages 19, 23).
2Press the 
button.
3Press the 
/ 
button.
To stop recording:
Press the 
button.
The disc and tape will stop.
!Recording from the radio
1Tune in to the desired station (see page 24).
2Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3 Press the 
button.
Recording will be paused.
4Press the 
/ 
button to start recording.
To interrupt recording:
Press the 
button.
To resume recording, press the 
/ 
button.
To stop recording:
Press the 
button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
!Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1Press the
2Load a prerecorded cassette
into the TAPE 1 cassette com- partment. Insert a blank tape into the TAPE 2 cassette com- partment.
TAPE 1 
TAPE 2
It is recommended that the recording tape is the same length as the master tape.
3Press the TAPE (1 
2) button until "TAPE 1" appears on the display.
4 Press the 
button.
Recording will be paused.
5Press the 
/ 
button to start dubbing.
To stop dubbing:
Press the 
button.
TAPE 1 and TAPE 2 will simultaneously stop.
!Erasing recorded tapes
1Load the tape to be erased into the TAPE 2 cassette compart- ment with the side to be erased facing toward you.
2Press the TAPE (1 
2) button until "TAPE 2" appears on the dis- play.
3Press the 
button.
4Press the 
/ 
button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
6
Tape Recording
29
03/12/19 | TINSZA040AWZZ |
