!Various tape functions
Function | Main unit | Remote | Operation |
|
| control |
|
Play |
|
| Press in the stop |
|
|
| mode. |
Stop |
|
| Press in the playback, |
|
|
| fast forward or fast re- |
|
|
| wind mode. |
Fast for- |
|
| Press in the playback |
ward/Fast |
|
| or stop mode. |
rewind |
|
|
|
(TAPE 2 |
|
|
|
only) |
|
|
|
Caution:
"To remove the cassette, press the 
button, and then open the compartment.
"Before changing from one tape operation to another, press the 
button.
"If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open. In this case, wait until the power is restored.
Recording on a cassette tape
Before recording:
"When recording important selections, make a preliminary test to ensure that the desired material is properly recorded.
"SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
"The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor).
"For recording, use only normal tapes. Do not use metal or CrO
tapes.
"When recording on a cassette tape, make sure that the erase- prevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing.
"To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhesive tape to record on the tape with- out the tab.
Side A
Tab for side B Tab for side A
6
Tape Recording
27
03/12/19 | TINSZA040AWZZ |
