unit. Avoid also applying undue force from the rotary lens mechanism.
•Do not touch the lens with a pointed object or bare hands. The lens may be flawed or stained. If the lens gets dirty, lightly wipe it with a cotton swab or any other soft material.
•Do not leave the product in a place exposed to direct sunlight, in a car, near a heater, or in any other place that may become hot. Such location can be a source of failure.
•Avoid using or leaving the product in a dusty or damp place. Such location can be a source of failure.
•Do not put the product in a back pocket of your pants or in a breast pocket. Undue force applied to the product may result in damage.
•The product is not of waterproof construction. Avoid using or storing the product where it may be splashed with water or other liquids. Rainwater, water splashes, juice, coffee, steam, and sweat can also be possible sources of failure.
•Do not drop or give a strong shock to the product. Failures, such as the loss of focus and inability to insert the product into the main unit, may result.
•Never touch the connection terminal. The product may be disabled under electrostatic influences. Also, never allow foreign matter inside the product to avoid possible failures.
•Avoid using the product for applications requiring more critical reliability than general equipment.
•Although the CMOS Image sensor is made of advanced precision technology, some pixels may look constantly bright or dark spots.
•The card unit may get somewhat heated after extended periods of service, but this is not a failure.
5
| Page 5 | 02.1.12, 1:03 PM Adobe PageMaker 6.5J/PPC |
