Notice
When using this product, please fully observe these handling precautions to prevent failures and other troubles.
•When carrying the main unit or leaving it out of service, remove the product from it and insert the included CF card slot Protection card in its place. Keep the product removed carefully to safeguard against undue pressure.
•Do not swing or carry the main unit with this product inserted in it by holding the main unit or product alone. The main unit or product may work loose, resulting in damage. Undue force applied to the product may impair the rotary lens mechanism or connection terminal of the product.
•Do not push or pull the product strongly while it is inserted in the main unit. Damage to the product or the main unit may result.
•Before inserting the product into the main unit, remove the Display protection cover from the main unit.
4
•Never remove the product or manipulate the battery replacement switch of the main unit while an image is being stored. These actions may corrupt the picture data.
•Do not place the product in an unstable place. It may fail under strong pressure or impact.
•Do not place the product on a rickety table or in an unstable place. The precision device may fall, resulting in failure under impact.
•Do not use the product in places where its use is either restricted or prohibited, as in aircraft in which it may interfere with the flight. Accidents may result.
•The time the LCD screen takes to get its brightness stabilized varies depending on the ambient temperature. Wait for a while until the brightness gets stabilized.
•Do not aim the lens at the sun. Color distortion or seizure may result.
•Be careful when using the product not to apply force to the digital camera cable. Undue force applied to the product may impair the connection terminal and other parts of the main
| Page 4 | 02.1.12, 1:03 PM Adobe PageMaker 6.5J/PPC |
