HOW TO USE THE REMOTE CONTROL

HOW TO USE THE REMOTE CONTROL

Point the remote control towards the units signal receiver window and press the desired button. A beep will sound when the unit re- ceives the signal.

Make sure nothing, such as curtains, blocks the signal receiver window.

The remote control operates up to

23 feet (7 meters) away.

CAUTION

Do not expose the signal receiver window to direct sunlight. This may adversely affect its operation. If necessary, close the curtains to block out the sunlight.

Use of a fl uorescent lamp in the same room may interfere with transmission of the signal.

The unit may be affected by signals emitted from other remote controllers for tel- evisions, VCRs or other equipment used in the same room.

Do not leave the remote control exposed to direct sunlight or near a heater. Pro- tect the remote control from moisture and shock which can discolor or damage it.

To prevent the remote control from being misplaced, hook it to the unit when not in use.

When attached, to remove the remote control from the unit, lift the remote control up slightly and pull it out.

E-14 Remote control hook

E-14

Page 15
Image 15
Sharp CV-P10LJ, CV-P13LJ operation manual How To Use The Remote Control, E-14