MAIN UNIT OPERATION
Use this mode when the remote control is not available.
1 | Press the POWER button on the unit. |
• The red OPERATION lamp on the unit will | |
1 | light. |
• If the unit has not been unplugged since it |
was last operated, it will resume operation at its last settings.
• If the unit has been unplugged since it was last operated, it will resume operation in the cooling mode, set at 20˚C. The fan speed set to AUTO.
TO TURN OFF
Press the POWER button again.
•The red OPERATION lamp on the unit will turn off.
DRAINAGE
Prepare for drainage and drain out water within the unit in the following cases.
•When the unit stops operating and the TIMER, OPERATION and MEGA COOL lamps are blinking, the water tank is full and need to be drained.
•When the unit is not used for a long time.
1Unplug the power plug and move the unit to a drain or outside.
2Remove the stopcock from the drainpipe, and drain water within the unit.
Stopcock
3 Replace the stopcock to the drainpipe.
Drainpipe
