If trouble occurs

When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1Set the unit to the stand-by mode and turn the power on again.

2If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

Clearing all the memory (reset)

1Press the ON/STAND-BY button to enter the power stand-by mode.

2While pressing down the SNOOZE/DIMMER button and the E SOUND/DEMO button, press the ON/STAND-BY button until “CLEAR ALL” appears.

SNOOZE/

E SOUND

DIMMER

/DEMO

Caution:

This operation will erase all data stored in memory including clock, alarm settings and tuner preset.

Before transporting the unit

Remove the iPod and the disc from the unit. Then, set the unit to the power stand-by mode. Carrying the unit with iPod left docked might damage both the unit and the iPod.

Maintenance

Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.

Caution:

Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet finish.

Do not apply oil to the inside of the unit. It may cause malfunctions.

Specifications

DK-A10

 

DK-A10BK

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General

 

 

 

 

 

Power source

AC 120 V, 60 Hz

 

 

Power

33 W

 

 

 

 

consumption

 

 

 

 

 

Output power

Front speakers: RMS: 4W (2W + 2W) (10% T.H.D.)

 

 

 

Subwoofer: RMS: 10W (5W + 5W) (10% T.H.D.)

 

 

Speaker

1-way type light-up speaker system

 

 

 

Front Speaker: 2-1/2"(6.5 cm) - 12 ohms - Full Range

 

 

 

Subwoofer: 4" (10 cm) - 8 ohms - Full Range

 

 

Speaker

Front Speakers: 4W

 

References

maximum

Subwoofer: 10W

 

input power

 

 

 

 

 

 

 

 

 

 

 

Speaker rated

Front Speakers: 2W

 

 

input power

Subwoofer: 5W

 

 

Output

Headphones: 16 - 50 ohms

 

 

terminals

(recommended: 32 ohms)

 

 

 

Video output: 1Vp-p

 

 

Input

Auxiliary (audio signal):

 

 

terminals

500 mV/47 k ohms

 

 

Dimensions

Width: 19-11/16" (500 mm)

 

 

 

Height: 5-7/8" (150 mm)

 

 

 

Depth: 9-7/8" (250 mm)

 

 

Weight

11.7 lbs. (5.3 kg)

 

 

Tuner

 

 

 

 

 

 

 

 

 

Frequency range

FM: 87.5 - 108 MHz

 

 

 

 

 

AM: 530 - 1,720 kHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

29