Enhancing your system

DK-A10

DK-A10BK

The connection cord is not included. Purchase a commercially available cord as shown below.

White

VCR, DVD, etc.

Red To the line output jacks

White Red

RCA cord (not supplied)

Auto power on function:

When you press any of the following buttons, the unit turns on. AUX button (main unit): The unit turns on and the AUX function is activated.

/ button (main unit and remote control): The unit turns on and playback of the last function starts (iPod, CD, TUNER, AUX).

Listening to the playback sounds from VCR, DVD, etc.

1Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks.

When using video equipment, connect the audio output to this unit and the video output to a television.

2Press the ON/STAND-BY button to turn the power on.

3Press the AUX button on the main unit once or press the FUNCTION button on remote control repeatedly to select AUX.

4Play the connected equipment.

Note:

To prevent noise interference, place the unit away from the television.

Headphones

Before plugging in or unplugging the headphones, reduce the volume.

Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOL (+ or –) control. During alarm activation, sound will be output to the speaker even if headphones is plugged in.

Advanced Features

27