System connections
Make sure to unplug the AC power cord before any connections.
Antenna connection
Supplied FM antenna:
Connecting iPod to TV
iPod photo and 5th Generation iPod with photo and video can be viewed by connecting to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT jack on the rear of the unit.
Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM and GND terminals. Position the
Video cable (not supplied)
TV
AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
To video
input jack
Note:
Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception.
Installing the AM loop antenna:
< Assembling > | < Attaching to the wall > |
| Wall Screws (not supplied) |
Outdoor FM antenna
Use an outdoor FM antenna if you require better reception. Consult your dealer.
AC power connection
After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode.
AC outlet
(AC 120 V, 60 Hz)
To AC input
Note:
Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time.
Demonstration mode
The first time the unit is plugged in, the unit will enter the demonstration mode.
To cancel the demonstration mode:
When the unit is in the demonstration mode, press the E SOUND/DEMO button. The unit will enter the power
75 ohms coaxial cable
Note:
Outdoor FM antenna
power consumption mode).
To return to the demonstration mode:
When the unit is in the power
Note:
10
When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.
When the power is on, the E SOUND/DEMO button can be used to select the E SOUND mode.