Listening to the radio (continued)
Radio
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)
1Perform steps 1 - 3 in “Tuning” on page 17.
2Press the MEMORY button on remote control to enter the preset tuning saving mode.
3Within 1 minute, press the 
or 
button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4Within 1 minute, press the MEMORY button on remote control to store that station in memory.
If the “MEMORY” and preset number indicators disappear before the station is memorized, repeat the operation from step 2.
5Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously memorized for that preset channel number will be erased.
Note:
The backup function protects the memorized stations for a few days should there be a power failure or the AC power cord becomes disconnected.
To recall a memorized station
Press the 
or 
button for less than 0.5 seconds to select the desired station.
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1Press the 
or 
button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.
2Press the 
or 
button again when the desired station is located.
CLOCK
VOL
SLEEP ALARM
DISPLAY
PLAY
MODE
TUNING
CLEAR
MEMORY
To erase entire preset memory
1Press and hold the CLEAR button on remote control for more than 3 seconds. “TUN CLEAR” will be displayed.
2Within 10 seconds, press the MEMORY button on remote control. “COMPLETE” will be displayed.
18