Note:
To prevent noise interference, place the unit away from the television.
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOL (+ or –) control. During alarm activation, sound will be output to the speaker even if headphones is plugged in.
Play the connected equipment.
4
AUX IN jacks.
When using video equipment, connect the audio output to this unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUX button on main unit once or press the FUNCTION button on remote control repeatedly to select AUX.
Use a connection cord to connect the VCR, DVD etc. to the
1
Listening to the playback sounds from VCR, DVD, etc.
Enhancing your system
The connection cord is not included. Purchase a commercially available cord as shown below.
White
VCR, DVD, etc.
Red To the line output jacks
White Red
RCA cord (not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on. AUX button (main unit): The unit turns on and the AUX function is activated.
/ button (main unit and remote control): The unit turns on and playback of the last function starts (iPod, TUNER, AUX).
Advanced Features
21