Listening to the radio
Auto power on function:
When you press any of the following buttons, the unit turns on. TUNER button (main unit): The unit turns on and the TUNER function is activated.
/
button (main unit and remote control): The unit turns on and playback of the last function starts (iPod, TUNER, AUX).
Tuning
1Press the
2Press the TUNER button on main unit or FUNCTION button on remote control repeatedly to select the desired frequency band (FM or AM).
3Press the TUNING (
or 
) button on remote control to tune in to the desired station.
Manual tuning:
Press the TUNING (
or 
) button as many times as required to tune in to the desired station.
Auto tuning:
When the TUNING (
or 
) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
or 
) button again.
To receive an FM stereo transmission:
Press the TUNER button (main unit) or FUNCTION button (remote control) to display the “ST” indicator.
“
” will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER button (main unit) or FUNCTION button (remote control) to extinguish the “ST” indi- cator. The reception changes to monaural, and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
17