Sharp DSR-PD150P manual 107

Changing the menu settings

						POWER
Icon/item		Mode	Meaning			switch
	CH SELECT	z CH1, CH2	To play back the CHs 1/2 audios from each			VCR
			channel. However, if you play back the
			audios via the camcorder’s speaker, the
			audios are mixed.
		CH1	To play back the CH1 audio from both
			channels 1/2.
		CH2	To play back the CH2 audio from both
			channels 1/2.
	AUDIO MIX	—	To adjust the balance between the channels			VCR
			1/2 (CH1/2) and channels 3/4 (CH3/4)
			(p. 87).
			CH1	CH3
			2	4
	A/VtDV OUT z OFF		To output analog images in digital format			VCR
			using your camcorder.
		ON	To output digital images in analog format
			using your camcorder.
	NTSC PB	z ON PAL TV	To play back a tape recorded on your			VCR
			camcorder on a PAL system TV.
		NTSC 4.43	To play back a tape recorded in the NTSC
			colour system on a TV with the NTSC 4.43
			mode.
	LCD B. L.	z BRT NORMAL	To set the brightness on the LCD screen to			VCR
			normal.			CAMERA
						MEMORY
		BRIGHT	To brighten the LCD screen.
	LCD COLOUR	—	To adjust the colour on the LCD screen with			VCR
			the SEL/PUSH EXEC dial.			CAMERA
						MEMORY
			To get low-		To get high-
			intensity		intensity
	VF B.L.	z BRT NORMAL To set the brightness on the viewfinder				VCR
			screen to normal.			CAMERA
						MEMORY
		BRIGHT	To brighten the viewfinder screen.
	GUIDEFRAME z OFF		Does not display the guide frame.			CAMERA
						MEMORY
		ON	Displays the guide frame (p. 35).

Notes on LCD B.L. and VF B.L.

•When you select “BRIGHT,” battery life is reduced a little during recording.

•When you use power sources other than the battery pack, “BRIGHT” is automatically selected.

Camcorder Your Customizing

107