Sharp DSR-PD150P To cancel MEMORY MIX, To change the mode setting, To change the still image to be superimposed

Superimposing a still image in a “Memory Stick” on a moving picture – MEMORY MIX

Items to be adjusted

M. CHROM	The colour (blue) scheme of the area in the still picture which is to
	be swapped with a moving picture
M. LUMI	The colour (bright) scheme of the area in the still picture which
	is to be swapped with a moving picture
C. CHROM	The colour (blue) scheme of the area in the moving picture
	which is to be swapped with a still picture
M. OVERLAP	No adjustment necessary

As the bar is shorter, the effect is enhanced.

To change the still image to be superimposed

Do either of the following:

–Press MEMORY+/– before step 6.

–Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step 4 (except M. OVERLAP).

To change the mode setting

Press SEL/PUSH EXEC dial after step 6, and repeat the procedure from step 4 (except M. OVERLAP).

To cancel MEMORY MIX

Press MEMORY MIX again.

During recording

You cannot change the mode setting.

The “Memory Stick” supplied with your camcorder has 20 images stored

–For M. CHROM: 18 images (such as a frame) 100-0001 to 100-0018

–For C. CHROM: two images (such as background) 100-0019 to 100-0020

Sample images

Sample images stored in the “Memory Stick” supplied with your camcorder are protected (p. 135).

If a still image to be superimposed has lots of white areas

The thumbnail image may not be displayed clearly.

Image data modified with personal computers or shot with other equipment You may not be able to play them back with your camcorder.

When the auto logo insert function is activated

You cannot use memory mix function.

Operations ”Stick Memory“

123