Sharp DSR-PD150P manual 108

Changing the menu settings

				POWER
Icon/item		Mode	Meaning	switch
	CONTINUOUS z OFF		Not to record continuously.	MEMORY
		ON	To record four images continuously (p. 119).
		MULTI SCRN	To record nine images continuously (p. 119).
	QUALITY	z SUPER FINE	To record still images in the super fine	VCR
			image quality mode, using a “Memory	MEMORY
			Stick” (p. 116).
		FINE	To record still images in the fine image
			quality mode, using a “Memory Stick”
			(p. 116).
		STANDARD	To record still images in the standard image
			quality mode, using a “Memory Stick”
			(p. 116).
	PRINT MARK	z OFF	To erase print marks on still images.	VCR
				MEMORY
		ON	To write a print mark on the recorded still
			images you want to print out later.
	PROTECT	z OFF	To release protection from still images.	VCR
				MEMORY
		ON	To protect selected still images against
			accidental erasure (p. 135).
	SLIDE SHOW	—	To play back all the images as a slide show	MEMORY
			(p. 134).
	DELETE ALL	—	To delete all unprotected images (p. 137).	MEMORY
	FORMAT	z RETURN	To cancel formatting.	MEMORY
		OK	To format an inserted “Memory Stick.”
			1. Select FORMAT with the SEL/PUSH EXEC
			dial, then press the dial. 2. Turn the SEL/
			PUSH EXEC dial to select OK, then press the
			dial. 3. After “EXECUTE” appears, press the
			SEL/PUSH EXEC dial. “FORMATTING”
			appears during formatting. “COMPLETE”
			appears when formatting is finished.
	PHOTO SAVE —		To duplicate images on a tape onto a	VCR
			“Memory Stick” (p. 127).

108

Formatting erases all information on the “Memory Stick”

Check the contents of the “Memory Stick” before formatting:

•Formatting erases sample images on the “Memory Stick.”

•Formatting erases the protected image data on the “Memory Stick.”

Notes on formatting

•Supplied or optional “Memory Stick”s have been formatted at the factory. Formatting with this camcorder is not required.

•While the display shows “FORMATTING,” do not turn the POWER switch, press any button, or eject the “Memory Stick”

•You cannot format a “Memory Stick” if the write-protect tab on the “Memory Stick” is set to LOCK.

•Format again if the message “” appears.

If formatting fails

The “ FORMAT ERROR” message appears.