Zoom ring
INPUT 4
• When pressing the INPUT buttons on the projector, input mode switches in the following order: INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6
• Pressing the INPUT buttons on the remote control also allows you to switch the input mode.
On-screen display
4. Turn the video equipment on and start playback
5. Select the INPUT mode

_P. 29

Select the “INPUT 4” using the INPUT buttons on the projector or the INPUT 4 button on the

remote control.

On the On the remote projector control

6. Adjust the focus, image size, and projector angle _PP. 30, 31

1. Adjust the focus by

 

2. Adjust the projection

 

3. Adjust the projector

turning the focus ring.

 

image size by turning

 

angle using the HEIGHT

 

 

 

 

the zoom ring.

 

ADJUST lever.

 

 

 

Focus ring

7. Correct trapezoidal distortion (GEOMETRIC ADJUSTMENT) _PP. 32–35

1.Press c KEYSTONE on the remote control.

2.Press P/R/O/Q on the remote control to set the upper-left position of the projected image.

3.Press i ENTER on the remote control to set the position.

4.Follow steps 2 and 3 to also set the upper-right, lower-right, and lower-left positions of the projected image.

•When you confirm the lower left position, the screen adjustments will be set and setup will end.

8. Turn the Power off

_P. 29

Press the STANDBY/ON button on the projector or the STANDBY button on the remote control, and then press the button again while the confirmation message is displayed, to put the projector into standby mode.

On the

On the remote

On-screen Display

 

projector

control

 

• Unplug the power cord from the AC outlet after the cooling fan stops.

Start Quick

17