Manuals / Brands / Computer Equipment / Projector / Sharp / Computer Equipment / Projector

Sharp DT-500 Image Projection, Info, BasicOperation, Switching the Input Mode, Turning the Power off (Putting the Projector into Standby Mode)

1 66

Download 66 pages, 4.35 Mb

STANDBY button

Turning the Power off (Putting the Projector into Standby Mode)

Press SSTANDBY/ON on the pro-

1 jector or aSTANDBY on the remote control, then press that button again while the confirmation message is displayed, to put the projector into standby mode.

	On-screen Display (confirmation message)
2	Unplug the power cord from the AC
2	outlet after the cooling fan stops.

•The power indicator on the projector blinks in green while cooling.

•The power indicator changes to red when the projector finishes cooling.

Info

R

•Do not unplug the power cord during projection or cooling fan operation. This can cause dam- age due to rise in internal temperature, as the cooling fan also stops.

Image Projection

INPUT buttons

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press the appropriate INPUT button on the remote control to select the desired input mode.

• When pressing INPUT (P/R) on the projector, input mode switches in the following order:

INPUT1 INPUT2 INPUT3

INPUT6 INPUT5 INPUT4

BasicOperation

29

Contents

Page Model No.: DT-500 Serial No.: INFORMATION Declaration of conformity PRODUCT DISPOSAL Caution Concerning Lamp Replacement How to Read this Operation Manual For Future Reference Contents Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Accessories Part Names and Functions Part Names and Functions (Continued) Rear View Page Caution Usable Range Quick Start INPUT 4. Turn the video equipment on and start playback 5. Select the INPUT mode 6. Adjust the focus, image size, and projector angle _PP. 30 7. Correct trapezoidal distortion (GEOMETRIC ADJUSTMENT) _PP. 32–35 Setting up the Projector Projection (PRJ) Mode Setup Indication of the Projection Image Size and Projection Distance Setting up the Projector (Continued) Picture (Screen) Size and Projection Distance Page Samples of Cables for Connection Connecting to Video Equipment Connecting to Video Equipment (Continued) Page Page Connecting to a Computer Turning the Projector On/Off Image Projection Image Projection (Continued) Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Screen Size 3 Adjusting the Height Page Correcting Trapezoidal Distortion Selecting the Type of Correction GEOMETRIC ADJUSTMENT H & V KEYSTONE Resize Mode Page Operating with the Remote Control Menu Items Menu Items (Continued) Using the Menu Screen Using the Menu Screen (Continued) To adjust the projected image while watching it Picture Adjustment (“Picture” menu) 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Adjusting the Colors 5Progressive 6Reducing Image Noise 7Switching the Iris (DNR) Setting 8Lamp Setting 1Adjusting the Computer Image 2Special Modes Setting 3Auto Sync (Auto Sync Adjustment) 4Checking the Input Signal Using the “Options” Menu 1Adjusting the Image Position 2Adjusting the Overscan 4Setting On-screenDisplay 5Setting the Video System 6Signal Type Setting 7Selecting the HDMI Setting 9Auto Power Off Function 0Checking the Lamp Life Status 1Reversing/Inverting Projected Images 4Fan Mode Setting 3Reducing the Power Consumption When the Power Is in Standby Mode 5Returning to the Default Settings Maintenance Maintenance Indicators Page Regarding the Lamp Warning Regarding the Lamp (Continued) Resetting the Lamp Timer Connecting Pin Assignments Computer Compatibility Chart Troubleshooting Service Information (For the U.S.) Specifications Dimensions Index