Select the Keystone correction method. Press cKEYSTONE on the remote control.
• “GEOMETRIC ADJUSTMENT” will be displayed.
• Each time cKEYSTONE is pressed, the display toggles as follows:
GEOMETRIC H & V KEYSTONE ADJUSTMENT
The display disappears. 
GEOMETRIC | For correcting an image by |
ADJUSTMENT | designating the corner of the |
| projected image. |
| (See page 34.) |
|
|
H & V | For correcting an image by |
KEYSTONE | designating the horizontal or |
| vertical axes. (See page 35.) |
|
|
Note
•When corrections are made with Keystone cor- rection, the changes are saved even if the power cord is unplugged.
•Since Keystone correction digitally corrects the signal, resolution may slightly decrease when it is used. Moiré patterns and line dis- tortions may also be visible in detailed images. However, this is not a malfunction.
•If you cannot correct trapezoidal distortion with Keystone correction, change the placement position of the projector.
•Straight lines and the edges of the displayed image may appear jagged, when adjusting the Keystone setting.
•Also read “About Copyrights” on page 37.
BasicOperation
33