Using the “Options” Menu (Continued)

2Selecting the Transmission Speed (RS-232C)

Serviceman only

When using the RS-232C terminal, set the baud rate of the projector to the same baud rate as the computer.

Selectable

Menu operation n Page 41

4Fan Mode Setting

This function changes the fan rotation speed.

Selectable

Description

items

 

Normal

Suitable for normal environments.

 

 

High

Select this when using the projector at

 

altitudes of approximately 4,900 feet

 

(1,500 meters) or more.

items

Description

When “Fan Mode” is set to “High”, the fan rotation

9600bps Transmission speed is slow.

P

R

115200bps Transmission speed is rapid.

3Reducing the Power

Consumption When the

Power Is in Standby Mode

When “STANDBY Mode” has been set to “Standard ”, the RS-232C function is activated and power is consumed even in standby mode. It is recommended that “STANDBY Mode” be set to “Eco” when it is not being used. This reduces power consumption when the projector is in standby mode.

Selectable items

Description

 

 

Standard

The RS-232C function is

 

activated even if the projector is

 

in standby mode.

 

 

Eco

The RS-232C function is

 

switched off when the projector

 

is in standby mode.

 

 

Note

•When you want to control the projector using the RS-232C function, set to “Standard”.

speeds up, and the fan noise becomes louder.

5Returning to the Default Settings

Use “All Reset” to initialize all the adjustments you have made to the default settings.

Note

The following items cannot be initialized.

•“Fine Sync” menu

–Special Modes

•“Options1” menu

–Lamp Timer (Life)

–Language

6Selecting the On-screen Display Language

The projector can switch the on-screen display language among 11 languages.

English Svenska

Deutsch Português

Español

Nederlands

Français

Italiano

50