Placing Originals
This section describes the types of originals you can set and how to place them.

About Originals

This section describes the types of originals that can be placed and the parts of the original that are
unscannable.

Recommended size of originals

This section describes the recommended size of the original.
Exposure glass
Up to 216 mm (8.5") in width, up to 297 mm (11.7") in length
ADF
• Paper size: 140 to 216 mm (51/2" to 81/2") in width, 140 to 356 mm (51/2" to 14") in
length
• Paper weight: 64 to 90 g/m2 (17 to 24 lb.)
• Only 1 sheet of an original can be placed on the exposure glass at a time.
• Up to 35 sheets of an original can be placed in the ADF at once (when using paper weighing 80
g/m2, 20 lb.).

Types of originals not supported by the Auto Document Feeder

If placed in the ADF, the following types of original might be damaged or become jammed, or result in
gray or black lines appearing on prints:
• Originals larger or heavier than recommended
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
2. Getting Started
118