Problem Cause Solution
PictBridge is not available. There is a problem with the USB
connection or the PictBridge
settings.
Use the following procedure to
check the connection and
settings:
1. Disconnect and then
reconnect the USB cable.
2. Check the PictBridge
settings are enabled.
3. Disconnect the USB cable,
and then turn off the
machine. Turn the machine
back on. When the
machine has fully booted
up, reconnect the USB
cable.
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
You have connected multiple
digital cameras.
Connect one digital camera
only.
Do not connect multiple
cameras.
Printing is disabled. The specified number exceeds
the maximum number that can
be printed at a time.
The maximum specifiable print
quantity at a time is 999.
Respecify the quantity to 999 or
less, and then retry printing.
Printing is disabled. There is no paper of the
specified size remaining.
There is no paper of the
specified size remaining.
If you have to use paper that is
not of the specified size,
perform continue printing using
mismatched paper or cancel the
print job. For details, see p.136
"If a Paper Mismatch Occurs".
Printing is disabled. The paper size setting for this
tray cannot be printed on the
machine.
Select the paper size setting that
can be printed on the machine.
3. Using the Printer Function
148