Sharp ER-A440 manual ER-11DK7G, ER-51DK7G

ER-12KT7, ER-22KT7

1) Attach two spacers to the keyboard frame.

Yellow

White

Yellow

White

White

Yellow

•Attach the yellow spacer to the left lower side, and the white spacer to the right lower side.

2)The key top of the ER-12KT7 and the ER-22KT7 includes the guide pin. Install the key top so that the guide pin is engaged with the spacer attached to the keyboard frame.

(When using 2 × 2 key top installing jig (UKOG-6725BHZZ) for installation)

1)Remove the key label and the key cap from the key top.

2)Attach the key top so that the guide arm is under the jig. Jig

Key top

Guide arm

3)With the jig inserted in the key top, slowly press down the key top until the guide arm is brought into contact with the guide holder A.

Jig

Key top

Guide arm

Guide arm

A

4)Remove the jig under the above condition 3), and press the key top.

5)Check that the key top operates properly.

6)Install the key label and the key cap.

ER-11DK7G, ER-51DK7G

– 7 –