PREPARATION

INSERTING BATTERIES IN THE REMOTE CONTROL

1

Remove the back cover
Press and slide the back cover to

 

remove.

 

 

 

2

Insert batteries

 

 

 

Insert batteries withand

 

as

 

shown below.3 Close the back cover
Battery Information

•The battery life is about 1 year.

•The batteries for this remote control are for initial use only . Change the batteries when necessary.

•Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take care of the following when handling:

•When replacing the batteries, replace both batteries with new ones of the same type. (Use 2 AA manganese batteries.)

•When not using the unit or remote control for an extended period, remove the batteries.

REMOTE CONTROL USE

• Operate the remote control facing the main unit

 

 

 

receiver.

 

 

 

• The signal range is about 23 feet (7m).

 

Receiver

• Make sure there are no objects blocking the

 

 

 

path of the signal.

 

 

 

• A beep sound will be heard from the main unit

Transmitter

 

 

when a signal is received.

 

 

 

 

 

 

 

 

 

 

NOTE

•Avoid dropping or damaging the remote control, using in a high humidity condition, in direct sunlight or near a heat source.

ENGLISH FRANÇAIS ESPAÑOL

E-9