Sharp FP-P60CX Plasmacluster Ion Mode Selections, REMOTE CONTROL OPERATION, OFF, Mode, AUTO, • OFF, CLEAN, • AUTO, • AUTO, Button, • CLEAN, • MANUAL, • POLLEN, selections

	OPERATION	the Remote Control
		Operations available with
		• AUTO
		• MANUAL
	REMOTE CONTROL OPERATION	• POLLEN
	REMOTE CONTROL OPERATION	• OFF TIMER
		• NIGHT MODE
		• Quick CLEAN
		• LIGHTS ON/OFF
		Plasmacluster Ion mode
	POWER ON/OFF Button	selections
	• W h e n y o u p r e s s t h e	• AUTO
	• W h e n y o u p r e s s t h e	• CLEAN
	POWER ON/OFF Button, a	• ION CONTROL
	short beep will sound and	• OFF
	operation will start in AUTO
	Mode.	Transmitter
	• Unless the power cord has	Transmitter
	b e e n u n p l u g g e d t h e	Filter Reset Button
	operation starts from the	Filter Reset Button
	previous mode the unit was	When the Washable Active
	operated in.	Carbon Filter is cleaned and
	• To stop, press the POWER	reinserted into the main unit,
	• To stop, press the POWER	press the Filter Reset Button.
	ON/OFF Button again.	press the Filter Reset Button.
	ON/OFF Button again.
	A long beep will sound and	Pollen Mode Operation
	operation will stop.	Pollen Mode Operation
	Auto (Fan Speed) Button	Button
	The fan speed switches au-	See Page E-12
	tomatically depending on the
	amount of impurities in the air.

Manual (Fan Speed) ButtonThe fan speed can be switched among SILENT, MEDIUM and MAX settings.NIGHT MODE ButtonSee page E-12QUICK CLEAN Button

See page E-12

LIGHTS ON/OFF Button

Switches the Plasmacluster Indicator Light and CLEAN- SIGN Light either ON or OFF.

Off Timer ButtonThe set time switches every time the button is pressed as shown below.

1 hour	4hours
Cancel	8 hours

•The indicator light shows the remaining time.•The unit will stop operation when the time is up.

Plasmacluster Ion Mode Selections

AUTO

When pressed, the unit will switch between Clean Mode and the Ion Control Mode automatically depending on the amount of impurities in the air as detected by the odor sensor. Clean Mode will operate for 1 minute when the Auto function is selected.

CLEAN

When pressed, the unit will constantly operate in the Clean Mode, in which the same numbers of positive and negative ions are discharged. The Plasmacluster Indicator Light is blue.

ION CONTROLWhen pressed, the unit will constantly operate in Ion Control Mode.The Plasmacluster Ion Indicator Light is green.

OFF

The generation of ions will be ceased and the Plasmacluster Indicator Light will go out.

E-14