10
HT-SB200
2008 December 16
HT-SB200_A6_EN.fm
Preparation for Use
Speaker preparation (continued)
Note:
Make sure all screws are fully tighten. (screws are not supplied)
■
Installing the speaker
4
Screw the wall mount angle to the wall as shown in the
illustration. (Total screw is 8 pieces)
Wall surface
Wall mount angle
Wall mount angle
Wall surface
Wall surface
Wall mount angle
(screws x 4)
(screws x 4)
1
Align the wall mount slot at the speaker to the wall
mount angle.
2
Slot the speaker into the wall mount angle.
3
Fix them securely.
Wall surface