Sharp HTSB600, HT-SB600 operation manual Antenna connection, Outdoor FM antenna, Hdmi Connection

System connections (continued)

Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM

75 OHMS jack and position the FM FM antenna wire in the direction where the antenna strongest signal can be received.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM and GND (Ground) terminals. Position the AM loop antenna for optimum reception. Place the AM loop on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Installing the AM loop antenna:

<Assembling> <Attaching to the wall>

Wall Screws (not supplied)

Note:

Placing the antenna on the unit or near the AC power cord may cause noise pickup.

Place the antenna away from the unit for better reception.

Outdoor FM antenna

Use an outdoor FM antenna if you require better reception. Consult your dealer.

Outdoor

75 ohms FM coaxial cable antenna

Note:

When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.

HDMI Connection

Caution:

Turn off all other equipment before making this connection.

The illustration below shows the flows of the signals.

Audio and Video signal

TV	DVD/Blu-ray
	Game console
	Digital tuner

TV

DVD, Blu-ray disc player or similar

To HDMI (ARC) input terminal

To HDMI output

terminal

To HDMI

output

terminal

To HDMI input

terminal

HDMI cables are not supplied

To select HDMI 1, 2, 3 or TV ARC function:

On main unit:	Press INPUT button repeatedly until
	“HDMI1”, “HDMI2”, “HDMI3” or “TV
On remote	ARC” appears on the display.
	Press HDMI1, HDMI2, HDMI3 or TV
control:	ARC button.

Notes:

●This unit supports HDMI which enables ARC (Audio Return Channel) function.

●To enable ARC function make sure to use High Speed HDMI cable.

●This structure also needs TV that supports ARC function.

●To listen to the sound from non-ARC-compatible TV, connect the digital output from TV to this system digital input terminal. (refer page 13)

●This unit can be operated (power on/off, volume up/ down or switch input source) via a TV or similar component which supports HDMI CEC (Consumer Electronics Control) function. If this does not work, it does not mean this system is faulty. Refer to the operation manual of the respective component on how to activate the CEC function. Example: Go to the Menu of the component to search and turn on the CEC function. Different brands may have different naming for the CEC function. For Sharp LCD TV, it is named as

AQUOS LINK.

●To watch 3D images, connect 3D-compatible TV and video component (Blu-ray Disc player, etc.) to this system.

Make sure to use High Speed HDMI cables and put on the 3D glasses, otherwise 3D images may not be viewed properly.

E-12