Sharp HT-SB600 Bass control, Treble control, Dolby Virtual Speaker DVS sound mode, Function

General control (continued)

Bass control

1. Press the BASS/TREBLE button to select “BASS”.

2.Within 5 seconds, press the VOLUME (+ or –) button to adjust the bass.

Treble control

1. Press the BASS/TREBLE button to select “TREBLE”.

2.Within 5 seconds, press the VOLUME (+ or –) button to adjust the treble.

Audio Return Channel (ARC) (Audio Return Channel submenu)

The audio return channel (ARC) function enables an HDMI ARC-capable TV to send the audio stream to the HDMI OUT jack of the receiver. To use this function, you must select the TV ARC input and your TV must supports the ARC function.

Dolby Virtual Speaker (DVS) sound mode

The Dolby Virtual Speaker (DVS) creates virtual surrounds comparable to the 5.1ch sound produced by the 3.1ch speaker.

When setting DVS to “ON” for 2 channel stereo signals, Dolby Pro Logic II brings out virtual sound effects through

X-Bass control

When the X-BASS button on the remote control is pressed, the unit will enter the extra bass mode which emphasizes the bass frequencies, and X-BASS indicator will appear. To cancel the extra bass mode, press the

X-BASS

X-BASS

the signals converted into 5.1ch.

Notes:

●Monaural signals do not generate surround effects.

●DVS equalizer effect may not be obtained depending on signal types (the Dolby Virtual Speaker indicator blinks). In this case, set the DVS mode to OFF.

X-BASS or BASS/TREBLE button.

DVS

The Dolby Virtual Speaker creates multichannel- like sound effects.

Compared with the cinema mode, the bass sound

Function

HDMI 1 HDMI 2 HDMI 3 TV ARC DIGITAL 1

AM FM FM ST LINE 2 LINE 1 DIGITAL 2

On the main unit:

When pressing the INPUT button, the input source will change. Press the INPUT button repeatedly to select desired input source.

On remote control:

Press the LINE 1 or 2 button to select LINE IN 1 input or LINE IN 2 input.

Press the DIGITAL 1 or 2 button to select DIGITAL IN 1 input or DIGITAL IN 2 input.

Press the HDMI 1 or 2 or 3 to select HDMI input.

Press the TUNER(BAND) button repeatedly to select tuner function (FM ST/FM Mono/AM).

Press TV ARC button to select TV ARC.

Note:

The backup function will protect the memorized function mode for a few hours should there be a power failure or the AC power cord becomes disconnected.

Auto power on function:

When you press any function button on the remote control, the unit will turn on.

Auto power off function:

The unit will automatically go to stand-by mode if:

1.No signal is detected within 20 minutes.

2.No reception of tuner broadcast signal within 20 minutes.

level is slightly reduced.

The Dolby Pro Logic II indicator also lights up if 2ch sound signals are detected.

●The DVS can be turned OFF by selecting other preset equalizer modes.

This product incorporates decoders supporting the Dolby Digital system and DTS system.

DTS (Digital One of the digital audio systems for

Theater theatrical use. As the sound quality is

Systems) emphasized, you can enjoy the realistic sound effect in the home theater system. Lights up when detecting DTS signal.

Dolby Digital One of the digital audio systems for theatrical use. You can also enjoy the stereophonic effect in the home theater system.

Lights up when detecting Dolby Digital signal.

Dolby Pro System expanding 2ch stereo sound to

Logic II more spacious sound. When setting Dolby Virtual speaker to “ON”, Dolby Pro Logic II is activated to enjoy the stereo sound effect.

Lights up when Dolby Pro Logic II is activated.

PCM This is a general term for digitally (Pulse Code encoded audio signals on a CD or DVD. Modulation) This unit lets you enjoy playback of digital signals from sources such as CD or DVD.

The indicator lights up when a PCM signal is detected.

E-17