Timer operation (Remote Control only) (continued)
After completing the setting
When the timer setting is completed:
The unit is in the timer playback
TIMER
When the start time is reached:
Unit starts automatically and the volume increases gradually. The unit is operated by the timer.
When the finish time is reached:
The unit is set to the power
The timer setting is canceled.
To check the timer setting:
1.While in the timer playback
2.Within 10 seconds, press the or button to select “TIMERCAL”,
and press the ENTER button.
The unit returns to the timer playback
Canceling the timer playback:
Timer playback is canceled by turning the power on while in the timer playback
1.Press the TIMER button. “TIMEROFF” will appear.
2.Within 10 seconds, press the ENTER button. Timer playback will be canceled (the contents of the setting will not be canceled.)
Reusing the timer:
Using the same setting;
The timer setting will be memorized once it is entered. To reuse the same setting, perform the following operations.
1.Turn the power on and press the TIMER button. “STANDBY” will appear. If it does not appear, set the unit to the correct time.
2.Within 10 seconds, press the ENTER button. After the setting contents are displayed in order, the unit is set to the timer playback
Changing the setting;
Turn the power on, and repeat the operation from step 1 in “Setting the timer” (page 19).
Operating the TV with the remote control
You can operate Sharp TVs with this system’s remote control.
Watching TV
Point the remote control at the TV.
1Press the TV
2Pressing the TV CH or button enables TV channel switching.
3Press the TV VOL. + or - button to adjust the TV volume.
Other operable button
Input Select Button