Sharp IM-MT899H Advanced Recording

02/2/21 IMMT899H_E_4.fm

E-25

IM-MT899H

ENGLISH

Useful Features

-Advanced Recording-

Advanced Recording

„Playback sound-actuated recording

Recording automatically starts or pauses by detecting sound

from the stereo system (Synchronised recording).

To interrupt recording

zWhen the stereo system is stopped, the unit will enter the

synchro recording pause mode. When playback is

resumed, the recording will be resumed.

zIf a silence lasts for 3 seconds or more, the recording will

be paused (pause function does not work for approxi-

mately 10 seconds after a recording starts). When the unit

receives sound again, recording automatically starts.

zA new track number is created when the recording

resumes.

1Hold down the REC button for 2 seconds or more.

You can perform the same operation by simply press-

ing the REC button on the main unit.

2To perform group recording, hold down the

GROUP button for 1 second or more so that

"GROUP" is lit.

When group recording is not performed, hold down the

GROUP button for 1 second or more so that "GROUP"

goes out.

3Begin playback on the stereo system connected

to this portable MD.

4Move the M button toward or to adjust the

recording level (page 15).

You can perform the same operation by pressing the

or button on the main unit.

5Press the PAUSE button on the stereo system to

enter the playback pause mode.

Select the starting point for your recording and press the

PAUSE button.

6Press the MODE button repeatedly to select the

recording mode (page 27).

7Press the M button.

zThe unit enters the menu select mode.

zYou can perform the same operation by pressing the

SYNC button on the main unit. (At this time, steps 8 -

9 can be omitted.)

8Move the M button toward

or to select "S(SYNC)"

and press it.

9Press the M button.

Synchro recording will be paused.

10Begin playback on the stereo system. Recording

will begin automatically.

Contents

Main IM-MT899H 2i ii 4 iii iv 6v Page 8 vii viii -Introduction/Contents- E-1 Introduction Contents Important Introduction Page Preparation Basic Operation Useful Features Page Special Notes Accessories -Precautions- E-3 Precautions Important Storing the unit Names of Controls and Indicators Names of Controls and Indicators (continued) E-6 Menu button operation Menu display -Using with the Rechargeable Battery- E-7 Using with the Rechargeable Battery Charging 1 2 3 -Using with the Rechargeable Battery- E-8 Display of remaining amount of battery Charging time Refresh Using with the AC Adaptor 1 2 3 -Using with the Alkaline Battery/Inserting a MiniDisc- E-10 Using with the Alkaline Battery Inserting a MiniDisc 1 2 3 1 2 3 -Connections- Connections -Long Time Recording and Group Recording- 02/2/21 IMMT899H_E_3.fm E-12 Long Time Recording and Group Recording Long time recording Group recording Setting the group mode To cancel the group mode Page E-14 1 2 3 4 5 Recording (continued) To interrupt recording To stop recording To update the recorded contents of the Mini- Disc Recording level E-16 Adding tracks to an existing group About the TOC E-17 Recording (continued) To prevent recorded MiniDiscs from being erased accidentally Helpful tip when attaching a label About sampling rate converter Note for digital recording Group Playback Playback of group-recorded MD Setting the group mode To cancel the group mode Page -Playback- E-20 7-colour indicators 1 2 3 -Playback- E-21 1 2 3 1 2 E-22 Advanced Playback To locate the desired portion To locate the beginning of a track E-23 Advanced Playback (continued) Random play or repeat play During playback, press the MODE button repeatedly to select the playback mode. Notes: E-24 Intro play 1 2 E-25 Advanced Recording Playback sound-actuated recording 1 2 3 1 2 E-27 Advanced Recording (continued) About the recording mode Caution for 4 times long recording (LP4) To create your own track numbers E-28 1 2 3 Recording from a Microphone E-30 Sound-actuated recording (Mic Synchro- nised recording) 1 2 3 4 6 9 10 11 E-32 Track intervals 1 2 3 4 -Checking Displays- Checking Displays To check the remaining recording time and the total playing time Whilst in the stop mode, hold down the DISP button for 1 second or more. To display the playing time of an individual track 1 -Checking Displays- E-34 To check the elapsed time and remaining time of the track Whilst the playback or the playback is paused, hold down the DISP button for 1 second or more. Checking the remaining amount of battery level Titling a MiniDisc Creating a disc name 1 2 2 4 5 1 2 3 E-37 Titling a MiniDisc (continued) Characters (symbols) Stamping titles from another MiniDisc Before stamping E-38 1 2 3 4 6 Editing a Recorded MiniDisc To erase one track at a time 6 To erase all of the tracks at once 1 1 3 4 1 3 5 6 E-41 1 3 E-42 Moving a track to another group Moving a group to the top 1 3 4 5 6 1 3 4 E-43 Editing a Recorded MiniDisc (continued) 1 3 4 2 3 2 3 -Changing Default Settings- E-45 Changing Default Settings 1 2 3 4 5 -Changing Default Settings- E-46 Beep sound Auto play Auto power save Hold Function -Listening through Another System- E-48 Listening through Another System Listening through a stereo system Listening through a car stereo -Other Features and Caution- E-49 Other Features and Caution Resuming auto play Rechargeable battery -Troubleshooting- E-50 Troubleshooting -Troubleshooting/Maintenance- E-51 Troubleshooting (continued) If trouble occurs Maintenance Cleaning -MiniDisc System Limitations- E-52 MiniDisc System Limitations -Error Messages- E-53 Error Messages (Check the number of tracks.) Number or symbol appears in (*) position. -Error Messages- E-54 -Specifications- E-55 Specifications -Specifications- E-56