Sharp IM-MT899H -Error Messages-

02/2/21 IMMT899H_E_6.fm

E-54

IM-MT899H

ENGLISH

References

-Error Messages-

Number or symbol appears in (*) position.

If the operation is not accepted, "--" may be displayed on the

main unit. For details, refer to the display on the remote con-

trol.

ERROR MES-

SAGES MEANING

N-FULL zThe number of a disc, group, or track

name exceeds 40.

(Shorten the name.)

NoDISC zA disc has not been loaded.

noSIG zPoor connection of the digital cable.

zNo output signal comes out from the

connected unit to playback.

(Use the AC power for the connected

unit.)

zThe input signal has improper sam-

pling frequency.

NoTRACK zThere is no track to be played.

PLAYmd zYou tried to record on a playback-only

disc.

POWER ? zThe battery charger is defective.

PROTECTED zThe write protection tab of a MiniDisc

is set to the protected position.

Sorry zSince a track number is currently be-

ing located or updated, the unit cannot

accept your command.

(Wait for a while and try the operation

again.)

T Form (*) zThere is an error in the recording sig-

nal.

(Erase all of the tracks, and then record

again.)

ERROR MES-

SAGES MEANING

T-FULL zThere is no space left for recording

character information (track names,

disc names, etc.).

TEMP! zThe temperature is too high.

(Turn off the power, and wait for a while.)

Tr. Protect zThe track has been protected from be-

ing erased.

(Edit the track with the device on which it

was recorded.)

?DISC zA disc which contains data other than

music was played.

(A disc which contains nonmusic data

cannot be played.)

?GrForm zThe group recording or the GROUP

RESERVE function cannot be per-

formed.

(Erase the disc name and retry the same

operation.)

Contents

Main IM-MT899H 2i ii 4 iii iv 6v Page 8 vii viii -Introduction/Contents- E-1 Introduction Contents Important Introduction Page Preparation Basic Operation Useful Features Page Special Notes Accessories -Precautions- E-3 Precautions Important Storing the unit Names of Controls and Indicators Names of Controls and Indicators (continued) E-6 Menu button operation Menu display -Using with the Rechargeable Battery- E-7 Using with the Rechargeable Battery Charging 1 2 3 -Using with the Rechargeable Battery- E-8 Display of remaining amount of battery Charging time Refresh Using with the AC Adaptor 1 2 3 -Using with the Alkaline Battery/Inserting a MiniDisc- E-10 Using with the Alkaline Battery Inserting a MiniDisc 1 2 3 1 2 3 -Connections- Connections -Long Time Recording and Group Recording- 02/2/21 IMMT899H_E_3.fm E-12 Long Time Recording and Group Recording Long time recording Group recording Setting the group mode To cancel the group mode Page E-14 1 2 3 4 5 Recording (continued) To interrupt recording To stop recording To update the recorded contents of the Mini- Disc Recording level E-16 Adding tracks to an existing group About the TOC E-17 Recording (continued) To prevent recorded MiniDiscs from being erased accidentally Helpful tip when attaching a label About sampling rate converter Note for digital recording Group Playback Playback of group-recorded MD Setting the group mode To cancel the group mode Page -Playback- E-20 7-colour indicators 1 2 3 -Playback- E-21 1 2 3 1 2 E-22 Advanced Playback To locate the desired portion To locate the beginning of a track E-23 Advanced Playback (continued) Random play or repeat play During playback, press the MODE button repeatedly to select the playback mode. Notes: E-24 Intro play 1 2 E-25 Advanced Recording Playback sound-actuated recording 1 2 3 1 2 E-27 Advanced Recording (continued) About the recording mode Caution for 4 times long recording (LP4) To create your own track numbers E-28 1 2 3 Recording from a Microphone E-30 Sound-actuated recording (Mic Synchro- nised recording) 1 2 3 4 6 9 10 11 E-32 Track intervals 1 2 3 4 -Checking Displays- Checking Displays To check the remaining recording time and the total playing time Whilst in the stop mode, hold down the DISP button for 1 second or more. To display the playing time of an individual track 1 -Checking Displays- E-34 To check the elapsed time and remaining time of the track Whilst the playback or the playback is paused, hold down the DISP button for 1 second or more. Checking the remaining amount of battery level Titling a MiniDisc Creating a disc name 1 2 2 4 5 1 2 3 E-37 Titling a MiniDisc (continued) Characters (symbols) Stamping titles from another MiniDisc Before stamping E-38 1 2 3 4 6 Editing a Recorded MiniDisc To erase one track at a time 6 To erase all of the tracks at once 1 1 3 4 1 3 5 6 E-41 1 3 E-42 Moving a track to another group Moving a group to the top 1 3 4 5 6 1 3 4 E-43 Editing a Recorded MiniDisc (continued) 1 3 4 2 3 2 3 -Changing Default Settings- E-45 Changing Default Settings 1 2 3 4 5 -Changing Default Settings- E-46 Beep sound Auto play Auto power save Hold Function -Listening through Another System- E-48 Listening through Another System Listening through a stereo system Listening through a car stereo -Other Features and Caution- E-49 Other Features and Caution Resuming auto play Rechargeable battery -Troubleshooting- E-50 Troubleshooting -Troubleshooting/Maintenance- E-51 Troubleshooting (continued) If trouble occurs Maintenance Cleaning -MiniDisc System Limitations- E-52 MiniDisc System Limitations -Error Messages- E-53 Error Messages (Check the number of tracks.) Number or symbol appears in (*) position. -Error Messages- E-54 -Specifications- E-55 Specifications -Specifications- E-56