Settings when using external devices
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on the TV
TV/VIDEO allows you to choose from the available input sources.
1Press TV/VIDEO on the remote control unit or on the TV.
2Press TV/VIDEO on the remote control unit or on the TV to select the input source.
•The image and sound from the selected source are output on the TV.
•You can also select the input source by pressing a/b.
Using PC on the remote control unit
PC allows you to directly select the PC.
Press PC on the remote control.
• The image and sound from the PC are output on the TV.
Labelling input sources
You can assign each input source a label as you prefer.
1Press TV/VIDEO to select the desired input source.
2Press MENU and the MENU screen displays.
3Press c/d to select “Setup”.
4Press a/b to select “Input Label”, and then press ENTER.
5Press a/b to select characters and c/d to move to the desired digit to label the input source.
•When you want to change the input label that you
have already assigned to the default name, press c/d to move to “CLEAR” on the “Input Label” screen, and then press ENTER.
6Repeat the above until the name is fully spelt out, and then press MENU.
•The name can be 6 characters or less.
•When you want to set an input source name of less than 6 characters, press MENU to exit from the labelling menu.
TV
INPUT1
INPUT2
DVD
(Example)
NOTE
• You cannot change labels if the input source is TV.
35
