Connecting a PC
Use the PC terminals to connect a PC.
NOTE
•The PC INPUT terminals are
•Refer to page 42 for a list of PC signals compatible with the TV.
Ø3.5 mm stereo minijack cable (commercially available)
AUDIO
(L/R)
RGB cable (commercially available)
ANALOG
RGB
PC
Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
Pin No. | Signal name | Pin No. | Signal name | Pin No. | Signal name |
| R |
| GND (Ground) |
| Not connected |
| G |
| GND (Ground) |
| SDA |
| B |
| GND (Ground) |
| HD |
| Not connected |
| +5V |
| VD |
| CSYNC |
| GND (Ground) |
| SCL |
NOTE
•Macintosh adaptor may be required for use for some Macintosh computers.
•Pin No. 5 is not used for inputting the signal.
Displaying a PC image on the screen
To view an image from a PC, select “INPUT4” using
PC or TV/VIDEO on the remote control unit or TV/
VIDEO on the TV.
TV
INPUT1
INPUT2
INPUT3
INPUT4
When connecting to a PC, the correct input signal type is automatically detected. (See page 40.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
37
