Watching TV
Energy conservation settings
Auto | Auto |
This function is conveniently used when, for instance, going to bed while watching TV.
1Press SLEEP.
•Remaining time displays when sleep timer has been set.
Sleep timer: Remain 2 hr. 00 min.
2Each time you press SLEEP, the remaining time switches as shown below.
0 hr. 30 min. |
| 1 hr. 00 min. |
| 1 hr. 30 min. |
|
|
Off 
2 hr. 30 min. 
2 hr. 00 min.
NOTE
•When the time has been set, countdown automatically starts.
•Five minutes before the preset of time expires, the remaining time displays each minute.
•Select “Off” by pressing SLEEP to cancel the sleep timer.
You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day.
1Press MENU and the MENU screen displays.
2Press c/d to select “Power Control”, and then press ENTER.
• Power control menu displays.
3Press a/b to select “No Signal Off”, and then press ENTER.
4Press a/b to select “Enable”, and then press
ENTER.
•Five minutes before the power shuts down, the remaining time displays every minute.
NOTE
•“Disable” is the factory preset value.
•When a TV programme fi nishes, and the TV receives signal input, this function may not operate.
Auto power-off when there are no operations performed
You can set the TV to automatically power off when no TV operation is performed for more than 30 minutes or 3 hours.
1Press MENU and the MENU screen displays.
2Press c/d to select “Power Control”, and then press ENTER.
• Power control menu displays.
3Press a/b to select “No Operation Off”, and then press ENTER.
4Press a/b to select “30 min” or “3 hour”, and then press ENTER.
•Five minutes before the power shuts down, the remaining time displays every minute.
NOTE
• “Disable” is the factory preset value.
25
