Connecting a PC
Adjusting the PC image automatically | Adjusting the PC image manually |
This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable, etc.
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
3Press a/b to select “PC Setup”, and then press ENTER.
4Press a/b to select “Auto Sync.”, and then press ENTER.
5Press a/b to select “Yes”, and then press
ENTER.
• Auto Sync. starts.
MENU [Setup ... PC Setup]
|
|
|
|
Input Signal |
|
|
|
|
|
|
|
Auto Sync. |
| Yes |
|
|
|
|
|
Fine Sync. |
| No |
|
|
|
| |
|
|
|
|
|
|
|
|
NOTE
•Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (e.g. pattern with high contrast stripes, or
It may fail when an input PC image is solid (low contrast).
•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.
Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
3Press a/b to select “PC Setup”, and then press ENTER.
4Press a/b to select “Fine Sync.”, and then press ENTER.
Press a/b to select “Yes”, and then press
5ENTER.
6Press a/b to select a specifi c adjustment item among
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| [ 90] | a |
|
| b |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| [ 60] | a |
|
| b |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Clock | [ 90] | a |
|
| b |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Phase | [ 8] | a |
|
| b |
|
|
|
|
|
|
|
|
|
| Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selected item | Description |
|
|
Centres the image by moving it to the left | |
| or right. |
|
|
Centres the image by moving it up or | |
| down. |
|
|
Clock | Adjusts when the image fl ickers with |
| vertical stripes. |
|
|
Phase | Adjusts when characters have low |
| contrast or when the image fl ickers. |
|
|
7Press c/d to adjust the item to your desired position.
NOTE
•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press
ENTER.
•Images may not be displayed properly depending on the settings and/or input signals.
39
