Basic adjustment settings
Menu operation buttons
Use the following buttons on the remote control to operate the menu.
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the screen or adjust a selected item.
ENTER: Press to go to the next step or complete the setting.
RETURN: Press to return to the previous step.
Exit
On-Screen Display
|
|
|
| Example |
MENU | [ |
|
|
|
Picture |
|
|
| |
DYNAMIC |
|
|
| |
OPC |
|
| [On] |
|
Backlight |
|
|
|
|
Contrast |
| [ | 30] |
|
Brightness | [ | 0] | + | |
Color |
| [ | 0] | + |
Tint |
| [ | 0] |
|
Sharpness | [ | 0] | + | |
Advanced |
|
|
| |
Reset |
|
|
|
|
1Item displayed in yellow
•This indicates the item currently selected.
•Press ENTER to go to the adjustment screen for this item.
2Item in brackets
• This indicates the current setting for the item.
3Item displayed in white
• This indicates an item can be selected.
4Item displayed in gray
•This indicates that the item cannot be selected. There are various reasons why items cannot be selected, but the main reasons are as follows:
•Menu options differ in the selected input modes, but the operating procedures are the same.
•The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.
■Using the control panel of the main unit
You can also operate the menu with the control panel of the main unit.
Button operations on the control panel correspond to the ones on the remote control as shown below.
The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen.
VOL
CH (r)/(s): Cursor a/b on the remote control.
MENU: MENU on the remote control.
INPUT: ENTER on the remote control.
22
