Sharp LC-19D45U Channel search, When Air/Cable has been selected, Again, Channel Setup, Setting

Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language setting

Select from among 3 languages: English, French and Spanish.

1	Press MENU to display the MENU screen, and
	then press c/d to select “Setup”.
	Press a/b to select “EZ Setup”, and then
2 press ENTER.

Channel Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Antenna setting

1	Press MENU to display the MENU screen, and
	then press c/d to select “Setup”.
2	Press a/b to select “CH Setup”, and then
	press ENTER.
3	Press	a/b to select “Air/Cable”, and then
	press	ENTER.
4	Press a/b to select“Air”, “Cable(STD)”,
	“Cable(HRC)” or “Cable(IRC)”, and then press

	ENTER to enter the setting.
5	Press MENU to exit.

3	Press a/b to select the desired language
	listed on the screen, and then press ENTER.

Antenna setting

Make sure what kind of connection is made with your TV when selecting “Air”, “Cable(STD)”, “Cable(HRC)” or “Cable(IRC)”.

4	Press a/b to select “Air”, “Cable(STD)”,
	“Cable(HRC)” or “Cable(IRC)”. Press ENTER
	to enter the setting.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

5	When “Air/Cable” has been selected in
	Antenna setting and then press ENTER
	again.
	Press a/b to select “Analog & Digital” to
	search both analog and digital broadcasts or
	“Analog” to search only analog broadcasts or
	“Digital” to search only digital broadcasts, and
	then press ENTER,and select “Yes”.
	•	The Channel search will start automatically.
	•	To exit the Channel search screen, press
		RETURN.

6 Press MENU to exit.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

1	Repeat steps 1 to step 4 in Antenna setting in
	Channel Setup.
2	Press a/b to select “CH Search”, and then
	press ENTER.
3	When “Air/Cable” is selected in Antenna
	setting:
	Press a/b to select “Analog & Digital” to
	search both analog and digital broadcasts or
	“Analog” to search only analog broadcasts or
	“Digital” to search only digital broadcasts, and
	then press ENTER,and select “Yes”.
	•	The Channel search will start automatically.
	•	To exit the Channel search screen, press
		RETURN.

4 Press MENU to exit.

• If no channel is found, confi rm the type of connection made with your TV and try channel search again.

•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.

24