Sharp LC-22AA1M operation manual Basic operation, First installation

Basic operation

First installation

When you turn on the LCD TV set for the first time, the First installation routine, which makes installation easier, is activated. Using this routine, you can select the on-screen display language, and automatically search for and store all the receivable channels.

MAIN POWER

VOL CH MENU TV/VIDEO MAIN POWER

1

2

Press the MAIN POWER switch. The “First installation (Language)” screen with a list of the languages for the on-screen display appears.

Press a/bto select the desired language, and then press ENTER. The “First installation (Message)” screen appears.

First installation (Language)

English

M End

NOTE t

•You can change the on-screen display language after the First installation routine by selecting “Language” on the TV menu (see pages 13 and 14).

NOTE tes:

3	If you have already connected the
	antenna, press a/bto select
	“Yes”, and then press ENTER. If
	not, press a/bto select “No”, and
	then press MENU to exit. (You can
	try First installation again after
	connecting antenna. See page 6
	for antenna connection.)
4	Press a/bto select the desired

adjustment item, and then press ENTER. Then press c/dto select the desired item.

5

Press a/bto select “Start search”.

6 Press ENTER to begin the automatic programme search. The screen shows whatever is on channel 1 when the search is finished.

7 Press MENU to exit.

First installation (Message)

Connect antenna?

Yes:ENTER

No :MENU

R Back M End

	First installation
	(Automatic search)			PAL]
	Colour system	[
	Sound system	[		B/G]
	Start search
	R Back		M	End
	First installation
	(Automatic search)			PAL]
	Colour system	[
Sound system		[		B/G]
Start search
	R Back		M	End

Start search 759.25MHz Auto-B/G

08 SHARP 16

1	E02	9	17
2	E04	10	18
3	U02	11	19
4	U04	12	21
5	E05	13	22
6	E08	14	23
7	E10	15	24

R Cancel

Start search

Search is completed

08 SHARP 16

1	E02	9	17
2	E04	10	18
3	U02	11	19
4	U04	12	21
5	E05	13	22
6	E08	14	23
7	E10	15	24

M End

•The input mode is automatically switched to AV1 when “First installation” is selected.

•While performing the steps in the first installation, you can skip back to the screen before the first installation is selected by pressing Flashback (A).

10