![](/images/new-backgrounds/1277915/27791547x1.webp)
Useful features
Wide mode
You can change the screen size using f (WIDE) on the remote control.
1 Press f (WIDE) to select the Wide mode.
2 Each time you press f (WIDE), the mode changes as follows. You can select the desired mode.
Panorama
Full
Cinema 16:9
Auto
Normal
Zoom 14:9
Panorama
Full
Cinema 16:9
Zoom 14:9
Normal
Auto
Selected item | Description |
|
|
Panorama | In this mode the picture is progressively stretched toward each side of the screen. |
|
|
Full | For 16:9 squeeze pictures. |
|
|
Cinema 16:9 | For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. |
|
|
Auto | The Wide mode is switched automatically based on WSS (Wide Screen Signalling) informa- |
| tion |
|
|
Normal | For 4:3 “standard” pictures. A side bar appears on each side. |
|
|
Zoom 14:9 | For 14:9 letterbox pictures. A thin side bar appears on each side, and you may |
| also see bars on the top and bottom with some programmes. |
|
|
NOTE
•WSS (Wide Screen Signalling) information refers to the original wide mode information sent from the broadcasting station.
•When Auto is selected, the Panorama mode is selected automatically in the case WSS information indicates the 4:3 mode.
•Try to set Wide mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled.
•The Wide mode screen will disappear automatically after 4 seconds.
23