Function setup
Parental control setting
Some discs are specified as not suitable for children. Playback of such discs can be restricted with this TV/DVD.
1 | Press SETUP and the SETUP screen | |
displays. |
| |
2 | Press ϳ/ϴ to select | (SETUP), then |
press ϵ/϶ or ENTER. | ||
3 | Press ϳ/ϴ to select “Parental”, then press ϶ | |
or ENTER. |
| |
| “Enter Password” screen will appear. | |
4 | Press “0000” using Number buttons | |
(Please note, this is | ||
| this unit). Then press ENTER. The parental | |
| level list will appear. |
|
• If you input a wrong number, press CANCEL.
Selected item | Description |
Level Off | The parental control setting does not |
| function. |
Level 8 | Virtually all DVD software can be played |
| back. |
Level 1 | DVD software for adults cannot be |
| played back. |
•Select from level 1 to level 8. The limitation will be more severe as the level number decreases.
5 | Press ϳ/ϴ to select from the level 1 to level |
8. The limitation will be more severe as the | |
| level number is lower. Then press ENTER. |
6 | Press SETUP to return to the normal screen. |
NOTE
After the rating is locked, the setting cannot be changed unless you enter the correct password.
NOTE
•The password is required every time when you change the parental level.
•Depending on the discs, the TV/DVD may not be able to limit playback.
•Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the parental control feature will not work.
Set the new password
1 | Press SETUP and the SETUP screen | |
displays. |
| |
2 | Press ϳ/ϴ to select (SETUP), then press | |
ϵ/϶ or ENTER. |
| |
3 | Press ϳ/ϴ to select “Password”, then press | |
϶ or ENTER. |
| |
| “Enter Current Password” screen will | |
| appear. |
|
4 | Press Number buttons | |
password you have stored. | ||
| • If you input a wrong number, press CANCEL. | |
| Parental | : Off |
| Password | : Change |
5 | Then press ENTER. “Enter New Password” |
screen will appear. Press Number buttons | |
| |
6 | Press ENTER. Now your new password has |
been set. Be sure to remember this number! |
NOTE
If you forget the password...
1.Press EJECT to remove the disc.
2.While holding 7 down on the remote control and at the same time press STOP on the front panel. “Password Clear” appears on the screen. Now the password has been returned to the initial value (“0000”).
49