Connecting a PC (Personal computer)

Viewing an image from a PC

Use the INPUT6 (PC) terminals to connect a PC.

• LC-26DV22U/LC-26DV22U-W : INPUT5.

NOTE

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 35 for a list of PC signals compatible with the System.

•Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD set before connecting with the PC. (See page 35.)

•Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to your PC’s manuals regarding converting to external output.

Connecting the RGB cable

• Connect the RGB cable making sure that it fits correctly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug.

To Audio output

To AUDIO HDMI/PC

terminals

input terminal

͌3.5 mm stereo minijack cable

(commercially available)

PC

 

RGB cable

To ANALOG RGB

(commercially available) To PC IN

 

output terminal

terminal

Signal names for 15-pin mini D-sub connecter

5 4 3 2 1

10 9 8 7 6

15 14 13 12 11

Pin No.

Signal name

Pin No.

Signal name

Pin No.

Signal name

①

R

⑥

GND (Ground)

⑪

Not connected

②

G

⑦

GND (Ground)

⑫

SDA

③

B

⑧

GND (Ground)

⑬

HD

④

Not connected

⑨

+5V

⑭

VD

⑤

CSYNC

⑩

GND (Ground)

⑮

SCL

NOTE

•Pin No. 5 is not used for inputting the signal.

•Pin No. 9 is not connected with the supplied RGB cable.

Displaying an image from a PC

To view an image from a PC, perform the following procedure.

① Select the INPUT6 (LC-26DV22U/LC-26DV22U-W : INPUT5) (PC) mode using INPUT on the remote control or the TV/DVD set. (See page 14.)

② Select the PC input signal. (See page 35.)

③ Adjust the “PICTURE.” items if the PC image does not come in clearly. (See page 35.)

SOURCE SELECTION

0.TV

1.INPUT1

2.INPUT2

3.INPUT3

4.INPUT4

5.INPUT5

6.INPUT6

[0-6]:SELECT

34