Installing the Access Panel
1.Insert the access panel into the chassis.
2.Tighten the screw to secure the access panel to the chassis.
3.Install battery.
4.Follow the procedures in After Working Inside Your computer.
Removing the Hard Drive
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the Battery.
3.Remove the access panel.
4.Perform the following steps as shown in the illustration:
a.Remove the screw that secures the hard drive to the computer [1].
b.Slide the hard drive out from the computer [2].
c.Lift the hard drive upwards from the computer [3].
13