Installing the Display Assembly
1.Connect the eDP cable to the display panel.
2.Tighten the screws to secure the display panel to the display assembly.
3.Tighten the screws to secure the display hinges to the display assembly.
4.Align and press in the display bezel to the display assembly.
5.Guide the WLAN cables through their tabs and then tighten the display hinge screws to secure the display assembly.
6.Install:
a.system board
b.palmrest assembly
c.keyboard
d.memory module
e.hard drive
f.access panel
g.optical
h.battery
7.Follow the procedures in After Working Inside Your computer.
Removing the Camera
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.Battery
b.optical
c.access panel
30