d.hard drive
e.memory module
f.keyboard
g.palmrest assembly
h.system board
i.display assembly
3.Perform the following steps as shown in the illustration:
a.Disconnect the camera cable from the camera.
b.Release the retention tab from the display assembly [1].
c.Remove the camera from the display assembly [2].
Installing the Camera
1.Insert the camera into the display assembly.
2.Connect the camera cable.
3.Install:
a.display assembly
b.palmrest assembly
c.keyboard
d.memory module
e.hard drive
f.WLAN card
g.access panel
h.optical
i.battery
4.Follow the procedures in After Working Inside Your computer.
31