Preparation
Connecting the Display and AVC System
Use the supplied system cable.
1 Remove the back cover of the display.
• Press both of your thumbs upwards against the two tabs on lower side of the cover (✩) and pull down the cover.
Preparation
2
3
Remove the system cable cover.
1Insert the system cable connectors into the
display input terminal on the display and the output terminal on the AVC system until they click.
2Connect the AC power cords to the AC power inputs on the display and the AVC system.
2 Removing the system | |
cable cover |
|
•After connecting the various cables, fasten them using the provided cable clamps as shown in the diagram below before mounting the cover.
Rear view | e.g. Cables from |
Pass over the pins | the optional |
speaker system |
Supplied 
cable clamp
Hold this tab and slide the cover downward.
6