4 Mount the back cover of the display and the | 1 |
system cable cover. |
|
1Insert the four tabs on the upper side of the
cover (1) into the grooves on the rear of the display.
2 Press the two tabs on the lower side of the | 1 | 1 | 2 |
|
|
|
|
| |||
| 1 |
|
| ||
cover (2) into the grooves on the rear of |
|
| 1 | 3 | 2 |
the display until they produce a click sound. |
|
|
|
| |
|
|
|
|
| |
3 Press the two tabs on the lower side of the | 2 | 3 |
|
|
|
cover (3) into the grooves on the rear of |
| 3 |
|
| |
|
|
|
| ||
the display until they produce a click sound. |
|
| 2 |
|
|
5 Connect desired external equipment (e.g. DVD
player: See page 12). |
|
|
6 Mount the supplied AVC system terminal cover. |
| 1 |
|
| |
1 Align the protruding part in the center of the |
|
|
cover (1) with the outside of the AVC |
|
|
system. |
|
|
2 Align the two tabs on the lower side of the |
|
|
cover (2) with the two grooves in the lower |
|
|
side of the AVC system and push them |
|
|
gently in. |
|
|
3 Align the two tabs on the upper side of the |
|
|
cover (3) with the two grooves in the upper |
|
|
side of the AVC system and push them |
|
|
gently in. |
|
|
3 | 2 | 3 |
Removing the AVC system terminal cover
1Press both of your thumbs against the arrow marks (2 locations) on the upper side
of the cover and pull out gently to release the tabs on the upper side.
2Now pull away the entire cover to release
the tabs on the lower side.
Note
•Before connecting the power cord, be sure to set the MAIN POWER button on the
•When not using the unit for extended periods of time, be sure to always unplug the power cord.
•The display and the AVC system do not operate independently. Be sure to always
•When connecting external equipment to the AVC system, be sure to always make the necessary connections before plugging in the power cords.
•Do not remove the system cable while operating the unit. Doing so can cause a malfunction.
•Do not place anything over the ventilation openings on the top of the AVC system.
US 10