Basic Operation

Turning on POWER

Top view

BRIGHTNESS MAIN POWER

When the POWER/Standby indicator is “OFF”: Press MAIN POWER on the top panel of the display.

If the power cannot be switched on by pressing MAIN POWER, first press MAIN POWER in the “OFF” position, then while keeping INPUT pressed, press MAIN POWER again.

POWER/Standby indicator

When the POWER/Standby indicator lights up “red”: Press POWER on the remote control.

•When the power is switched on, the POWER/Standby indicator lights up green and a mode indicator appears on the upper right corner of the display.

Indicator (Example)

COMPO-1

CAUTION

Never pull the plug of the power cord before you switch off the power by using the MAIN POWER button on the top panel.

Note Unless external AV equipment is connected, the indicator “AV-1” appears on the display.

Switching INPUT Source

Press INPUT and select the applicable input source.

INPUT BRIGHTNESS

AV-1AV-2COMPONENT1COMPONENT2PC

Indicator (Example)

AV-1

Note

•The input source mode is skipped if the corresponding input terminal is not connected with external equipment (except “PC”).

•If you change the AV INPUT 3/AV OUT select, you can select “AV-3”. See

page 29 for details.

US 14