Sharp LC-30HV4M Basic adjustment settings Power Control for PC source, Power management

Basic adjustment settings

Power Control for PC source

Power Control allows you to reduce display brightness and save energy.

Power save

When set to “Save1”, “Save2”, or “Auto”, power consumption is reduced by decreasing backlight brightness.

1 Press MENU and the PC MENU screen displays.

2 Press c/dto select “Power Control”.

Power management

When set, the power will automatically shut down.

• Power Control menu displays.

3 Press a/bto select “Power Save”, and then press ENTER.

PC MENU

Power Control Setup

Power Save	[Standard]
Power Management	[Off]

4	Press a/b to select the desired backlight
	brightness, and then press ENTER.

PC MENU

1 Press MENU and the PC MENU screen displays.

2 Press c/dto select “Power Control”.

• Power Control menu displays.

3 Press a/bto select “Power Management”, and then press ENTER.

PC MENU

Power Control Setup

Power Save	[Standard]
Power Management	[Off]

Power Control

Power Save

Standard

Save1

Save2

Auto

Selected item	Description
Save1	The screen darkens slightly to conserve
	power consumption.
Save2	The screen darkens more significantly to
	conserve power consumption.
	Backlight brightness adjusts according to
Auto	the ambient light of the room to conserve
	power consumption.

NOTE

•When setting to “Auto”, the OPC indicator lights up green, senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

•Power Save can be set differently for AV input mode and PC input mode.

4 Press a/b to select “Mode1” or “Mode2”, and then press ENTER.

PC MENU

Power Control

Power Management

Off

Mode1

Mode2

Selected item		Description
Off	• No power management
	•	Factory preset value.
	•	If no signal inputs for 8 minutes, the power
		shuts down.
	•	Even if you start using the PC and the signal
Mode1		inputs again, the System stays off.
	• The System turns on again by pressing B
		(STANDBY/ON) button on the Display or B
		on the remote control unit. (See page 14.)
	•	If no signal inputs for 8 seconds, the power
Mode2		shuts down.
	• When you start using the PC and the signal
		inputs again, the System turns on.

37