Auto Sync. adjustment PC input mode only, Clock | Sharp LC-30HV4M

Useful adjustment settings

Auto Sync. adjustment (PC input mode only)

For automatically adjusting the PC image.

Fine Sync. adjustment (PC input mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimise the image.

1

2

3

4

Press MENU and the PC MENU screen displays.

Press c/dto select “Setup”.

• Setup menu displays.

Press a/bto select “Auto Sync.”, and then press ENTER.

Press c/dto select “Yes”, and then press

ENTER.

•Auto Sync. starts and “Adjusting the image” displays.

PC MENU

Setup

Auto Sync.

Yes		No

1 Press MENU and the PC MENU screen displays.

2 Press c/dto select “Setup”.

•If password is already set, you are asked to enter it. Follow the same step as explained in “Language setting for on-screen display (PC input mode)”. (See step 2 on page 28.)

3 Press a/bto select “Fine Sync.”, and then press ENTER.

4 Press a/bto select the specific adjustment item.

Setup

Fine Sync.

	H-Pos.	[0]	–90				+90


	V-Pos.	[0]	–60				+60


	Clock	[0]	–90				+90



	Phase	[0]	–20				+20


	Reset

30%

NOTE

•When Auto Sync. is successful, “Auto Sync. completed successfully” displays. If not, Auto Sync. failed.

•Auto Sync. may fail even if “Auto Sync. completed successfully” displays.

•Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (ex. pattern with high contrast stripes, or cross-hatched).

It may fail when an input PC image is solid (low contrast).

•Be sure to connect the PC to the AVC System and switch it on before starting Auto Sync.

5 Press c/dto adjust the item to your desired position.

NOTE

•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

	Selected item	Description

	H-Pos.	Centres the image by moving it to the left or
	H-Pos.	right.
		right.

	V-Pos.	Centres the image by moving it to up or
	V-Pos.	down.
		down.

	Clock	Adjusts the clock frequency.

	Phase	Adjusts the clock phase.

47

Image 48

Sharp LC-30HV4M Auto Sync. adjustment PC input mode only, Fine Sync. adjustment PC input mode only, Clock, Phase

Contents

LC-30HV4M Contents LC-30HV4M Important Safety Precautions Dear Sharp customer Important Safety Precautions Precautions when transporting the Display Supplied accessories Where to place the System Setting the System in placePreparation Setting the System Connecting the system cable and the AC cord to the DisplayPreparation Removing the terminal cover Closing the terminal cover Display rear viewCables come out from the small opening Setting the Display on the wall Setting the AVC System with the standUsing an optional bracket to mount the Display Hanging on the wall Using the remote control unit Inserting the batteries Part names Display AVC System Part names Remote control unit Connecting to an antenna Connecting to the power outletWatching TV Basic connection Turning on the power Turning off the powerWatching TV Using Flashback a on the remote control unit Using CHa/bon the remote control unitUsing 0 9 on the remote control unit Simple button operations for changing channels Simple button operation for changing volume/sound Changing the volumeUsing eon the remote control unit Mute Watching TV Using hon the remote control unit SRS sound options Watching TV Using Sound on the remote control unit Basic adjustment settings AV input mode menu itemsPC input mode menu items List of AV menu items to help you with operations Auto installation Basic adjustment settingsPress a/bto select Password, and then press Enter Press c/dto select Yes, and then press Automatic channel searching Automatic channel labellingAutomatic channel sorting Programme setup Press a/b to select Programme Setup, and then press EnterAuto search Press a/bto select Auto Search, and then press Enter Basic adjustment settings Manual setting for each channel Programme Setup Manual menuPress a/b to select Manual Adjust, Then press Enter Search tuning Fine tuning Colour system Labelling channelsColour system menu Labelling menu Setting the child lock Skipping channelsSkip menu Lock menu Basic adjustment settings Sort Press a/ b to select Programme SetupSort menus Press a/bto select Sort, and then press Language setting for on-screen display PC Input modeAV Input mode Press a/bto select Language, and then press Enter Picture adjustments Selected item Cbutton Dbutton ContrastRed Green Basic adjustment settings S. Colour Management System Press a/bto select Advanced, and then press EnterPress a/b to select C.M.S., and then press Enter Press a/bto select C.M.S., and then press Basic adjustment settings Colour temperature Black Press a/bto select Colour Temp, and then press EnterPress a/bto select Black, and then press Press a/bto select the desired level, and then press Enter Basic adjustment settings Monochrome Film mode Basic adjustment settings Setting Press a/ bto select I/P Setting, and thenDNR Digital Noise Reduction Press a/bto select DNR, and then press Audio adjustment Sound adjustmentSurround Press a/b to select Surround, and then press Enter Power Control Power Control for AV sourcePower save No Signal Off Press a/b to select No Signal Off, and then press EnterPress c/d to select Enable, and then Press Enter No Operation Off Basic adjustment settings Power Control for PC source Power management Using external equipment AVC System front view Using external equipment Connecting a DVD playerFor INPUT1 signal DVD player Watching a DVD image Connecting a VCR For INPUT2 signalWatching a VCR image Displaying a VCR image Connecting an Hdtv tuner For INPUT3 signalWatching broadcasts via an Hdtv tuner Displaying broadcasts via an Hdtv tuner Connecting a game console or camcorder Enjoying a game console and viewing camcorder imagesDisplaying an image of the game console or camcorder Connecting a PC Signal names for 15-pin mini D-sub connecterViewing an image from a PC Displaying an image from a PC Removing the speakers This unit has detachable type speakers Before attaching/detaching speakers Useful adjustment settings Image position AV input mode onlyDescription Useful adjustment settings Moving the picture on the screen Auto Sync. adjustment PC input mode only Fine Sync. adjustment PC input mode onlyFor automatically adjusting the PC image Phase Input signal source Input signal settingInput selection Colour system setting AV input mode only AV mode selectionSignal system of your equipment, and then Press a/b to select Colour System, and then press Enter Wide mode for AV input mode Manual SelectionAuto Selection Wide mode for PC input mode Input signal PC input mode only Press a/bto select Input Signal and then press EnterPress a/bto select the desired input signal on the display Example Wide screen signalling WSS AV input mode only Picture aspect ratio AV input mode onlyWSS signal 43 screen Mode Normal Press a/bto select WSS, and then press Selecting Full Mode display AV input mode only Full Mode screen Full mode Mode1Full mode Mode2 Press a/bto select Full Mode, and then press Enter AV input mode PC input modeRotate Sleep timer Audio outPress a/bto select Audio Out, and then press Enter Press c/d to select Fixed or Variable, and then press Enter Cool climate Press a/bto select Cool Climate, and then press Enter Password setting for child lock TV mode only Setting a passwordClearing the password Enter the 4-digit number as a password using Useful features Dual screen functionsDual screen Teletext language setting Useful features Picture and still imageUpdate the still image by pressing Enter Press d to exit still image Useful features What is Teletext?Teletext mode Teletext function Useful features Displaying Subpages Displaying TOP OverviewTOP Overview screen Subpage screen Useful features Time display Troubleshooting Problem Possible SolutionAppendix PC compatibility chart Appendix640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 Hz RS-232C port specifications PC Control of the System Commands Response code format Specifications Optional accessory30oLCD Colour TV, ModelLC-30HV4M Part name Part number Wall mount bracket AN-37AG1 Dimensional drawings Dimensional drawings HOW to SET the Factory Presets Press a/bto select Auto Installation Press Enter Sharp Corporation