Preparation

Where to place the System

“System” means the Display and AVC System. First select the location where to place the System.

1

Selecting the location of the System

• Select a place with no direct sunlight and good ventilation.

• The Display and the AVC System are connected by the system cable. (See page 6 for details.)

System cable

AVC System

Display

2 Setting the System in place

Handling the Display

CAUTION

• Do not remove the stand from the Display unless using an optional bracket to mount it.

• When moving, put your hands on the Display, but never on the Display speakers.

• Keep enough space above and behind the Display.

Handling the AVC System

CAUTION

CAUTION

• Do not put a VCR or other device on the AVC System.

Adjust the screen with both

• Keep enough space above and on the sides of the AVC System.

hands. Put one hand on the

Display and tilt the screen

• Do not block the ventilation openings on the top and left side,

while steadying the stand

and the exhaust fan on the right side.

with your other hand.

• Do not spread a thick cloth beneath the AVC System, or cover it

You can adjust the screen

vertically up to 10 degrees

with one, as this can cause overheating and result in

forward or 8 degrees back-

malfunction.

ward, or rotate 10 degrees

 

 

horizontally.

10 cm

 

or more

 

Keep enough space

 

5 cm or more

 

5 cm or more

on both sides

 

There is an exhaust fan

 

on the right side.

5

Page 6
Image 6
Sharp LC-30HV4M operation manual Preparation, Where to place the System, Setting the System in place