Sharp LC-30HV4M Setting the Display on the wall, Setting the AVC System with the stand

Preparation

Setting the Display on the wall

Using an optional bracket to mount the Display

•You can ask a qualified service personnel about using an optional AN-37AG1 bracket to mount the Display to the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG1 wall mount bracket. (See the bracket instructions for details.)

Vertical mounting Angular mounting

CAUTION

•Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Setting the AVC System with the stand

How to install the AVC System vertically using the stand unit.

• Use the supplied stand unit for installing the AVC System vertically in an upright position.

Stick each spacer to the		Attach each cushion to		Fit the stand to the AVC
1 stand as shown.		2 the stand as shown.		3 System.
Peel each spacer		Peel each cushion		Insert the stand into the AVC
				System, making sure that the
away from the		away from the
				thick and thin bulges of the
paper and attach	Stand	paper and attach
				stand align with the big and
to the four bulging		to the four areas at
	spacer		Stand cushion	small holes on the AVC
areas on the stand.		the bottom.
	Bulge			System.
			Attaching point	Thin bulge
Bulge				Small	Thick
		Attaching point			bulge
				hole
				Big hole
Attach the stand using the		The AVC System installed
4 stand screws as shown.		vertically with the stand.
	Stand screw

NOTE

•When mounting the AVC System vertically, always use the supplied stand. Be careful not to block vent holes when standing up directly on the floor or a flat surface as this can result in equipment failure.

8